e-mail türkçe | deutsch
 

Energy is the determining factor. Steel sandwich plate panels, 45 mm thick, with no cold bridge and foam-filled using CFC-free Polyurethane provide excellent insulation. Therfore sectional door type Thermo 45 is the perfect solution for heated operating areas, and therefore indispensable for a pleasant working environment and an economical energy balance.

Properties

  • Finger pinch protection
  • Sturdy panels with high insulation value
  • Various glazing options and combinations
  • Aluminium-coated springs and galvanised shaft
  • Operation by means of pull-cord, hand chain or electrical power
  • Optimum security.
  • Available in all RAL and BS colour
  • Door panel click for the technical drawing

    Finger pinch protection on door interior and exterior. Individual sections consist of sandwich steel panels, 500 or 625 mm in height and 45 mm thick. Top section is sized to fit. Steel plates are galvanised; insulation by means of CFC-free Polyurethane filling. Door panel may be completely solid or partially equipped with light apertures, as desired. Panels are structured and equipped with horizontal strips at equal intervals. The bottom section has rubber seal strip with double lip; top section has a single lip seal. The individual sections are properly sealed. Rubber seals on the left and right.

    Light openings and window sections click for the technical drawing

  • Oval windows with double, acrylic glazing, with a black plastic frame measuring approximately 700 x 300mm.
  • Rectangular windows with double acrylic glazing, with a black plastic frame measuring approximately 650 x 350mm.
  • A Prisma panel measuring 500 or 625 mm in height, consisting of aluminium tube profiles and plastic glazing frames, with a wide assortment of glazing types.
  • Door hardware and track systems

    You can chose the best alternative of available track systems for your needs

  • DY Low headroom
  • SY Standard lift
  • YY High lift
  • YY-YÖ S-Package, High lift
  • GY Vertical lift
  • GY-YÖ S-Package, Vertical lift
  • Wicket doors

    The sectional doors can be equipped with an integrated wicket door, including door closer, door hardware, and profile cylinder lock

    Construction and mounting

    The vertical track and the fastener are made of galvanised steel plate. Because the track sections are assembled with flat head bolts, perfect running can be guaranteed through post-adjustment.
    In accordance with the latest safety standards, the profiles are designed to minimize the risk of fingers getting pinched between moving parts. The horizontal guide track is extremely sturdy. The door hangs on steel cables that are wound on drums when it is opened. The weight of the door is balanced by means of springs mounted above the door.

    Locking

    A shoot bolt is a standard feature on manually-operated doors. An exterior lock with profile cylinder is optional, as is locking for electrically-operated doors.

    Operation

    Manual operation by means of pull-cord or hand chain drive. Electrical operation is optional using the economic Induport or a GfA drive with push buttons, available as shaft-mounted motor or with chain transmission.

    Colours and surfaces

    The Thermo panels are given a standard RAL 9002 base coat as standard. The exterior is also available in RAL 9006. Other RAL colours optional. Torsion springs are aluminium coated. All steel parts are galvanised.

    Options and accessories

  • Handle
  • Ventilation screens
  • Integrated wicket door
  • Wicket door in wall next to sectional door, same appearance as sectional door.
  • Stainless steel hinges
  • Various operating elements and electrically-powered controls
  • Safety features.
  • Assembly

    The sectional door is mounted on a sturdy steel frame. At the time of assembly, the floor must be completely flat, finished and load-bearing.

    Maximum opening angle at 68° click for the technic drawing

    Finger pinch protection ist normally given until 4mm. As to see in the section view the opening between the door sections for Thermo 45 and Prizma 45 door panels is 3.71mm maximum.

    Thermo 45

    Sandwich panel with double glazing

    (form for door dimensions)
     
    Copyright © 2009 FGİ All rights reserved.
    Nakışlar Mahallesi D100 Yanyol Caddesi No: 261 54200 Erenler / SAKARYA / TR - +90 264 276 99 09 pbx